Tempo Ultra WP

When treating large or overhead areas for carpenter wood-infesting beetles indoors, how should the product be applied?

• Thoroughly cover wood surfaces with a coarse spray ✓
• Brush or spray evenly on wood surfaces
• Inject dilution into the wood using a drill
• Apply as a soil drench beneath the structure

Answer: The label states for large or overhead areas of carpenter wood-infesting beetles: 'thoroughly cover wood surfaces with a coarse spray.'

When treating large or overhead wood surfaces for beetles, how should the product be applied?

• Thoroughly cover wood surfaces with a coarse spray ✓
• Brush the dilution evenly onto the surface
• Inject the foam into the wood grain
• Mist the area with a fine spray

Answer: The label specifies that for large or overhead areas, you should thoroughly cover wood surfaces with a coarse spray.

Which site is NOT listed as a restriction for turf application?

• Golf course turf
• Turf grown for commercial seed production
• Turf grown for research
• Residential recreational turfgrass ✓

Answer: The restrictions prohibit use on golf course turf, research turf, and commercial seed production turf, but do not prohibit residential recreational turfgrass.

🔗 Source

When treating carpenter ants indoors in houses or other structures, what is the maximum allowable dilution rate per 1000 square feet?

• Do not exceed 1 gallon of dilution per 1000 square feet ✓
• Do not exceed 2 gallons of dilution per 1000 square feet
• Use 5 to 10 grams per 1000 square feet
• Apply 1 gallon per 8 square feet

Answer: The label states for indoor carpenter ants: 'Do not exceed 1 gallon of dilution per 1000 square feet.'

For beetle control in structures, how long should gallery entrance holes be left open after spraying or foaming?

• 24 hours ✓
• 12 hours
• 48 hours
• 7 days

Answer: The label states to leave the entrance open for 24 hours to be sure that returning adult bees are killed.

What is the correct application rate for treating landscape and recreational turf against pests like grasshoppers and armyworms?

• 5 to 10 grams per 1,000 square feet ✓
• 1 gallon per 8 square feet
• 0.05% dilution per 1000 square feet
• 20 g per gallon of water

Answer: For turf pests, the label specifies a rate of '5 to 10 grams per 1,000 square feet.'

If a technician is performing a foam application, what is the required finished strength concentration?

• 0.025% to 0.05% concentration ✓
• 1 gallon per 1000 square feet
• 10 grams per 1000 square feet
• 7.7 to 15.4 oz per acre

Answer: The mixing instructions for foam applications specify a 0.025% to 0.05% concentration.

🔗 Source

When treating carpenter ants indoors in houses or other structures, what is the maximum application rate allowed?

• 1 gallon of dilution per 8 square feet
• 1 gallon of dilution per 1000 square feet ✓
• 5 to 10 grams per 1000 square feet
• 7.7 to 15.4 oz per acre

Answer: The label states for indoor carpenter ants, do not exceed 1 gallon of dilution per 1000 square feet.

🔗 Source